.svg){kind=small}
CARBONX™ NYLON PA6+CF
CARBONX™ NYLON PA6+CF
$ 95.00 AUD
500g
$ 95.00 AUD
Product Details
Gen 3 CarbonX™ CF-Nylon Filament is formulated using a PA6 copolymer reinforced with high-modulus carbon fiber. This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing. Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications.
Material Attributes
Our AquaTek® X1 Water Soluble Support works great with CarbonX™ CF NYLON and allows you to print parts with complex geometries and then dissolve away the support in warm water
Print industrial-grade CF-NYLON parts with Gearbox™ HT2 High-Temp 3D Printer.
Recommended Print Settings
- Extruder: 240-270°C. CarbonX™ CF Nylon exhibits improved layer bonding at higher temperatures.
- Bed Temp: 80 - 100°C
- Bed Prep: Polyimide Tape, Clean glass with ABS/Acetone Slurry
- Hardened Nozzle: 0.4mm or larger.
- Layer Height: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers below 0.25mm with carbon fiber grades. Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
- Support: Our Aquatek water soluble support works great to create complex parts.
Phone Number
0401 317 743
Contact
chris@project3d.com.au
.svg){kind=small}